Dataobj Down Upload Files Becs A15 Owner Manual General Unit Version 2019 03

• Contents
• Table of Contents
• Bookmarks

  Summary of Contents for DAHAO BECS-A15

• Page 1 刺绣机电脑 Computerized Embroidery Motorcar Controller BECS-A15 （ Full general Role ） Version ： 2019-03 操作手册 OWNER'S MANUAL http://www.dahaobj.com/en/sh.asp...

• Page 2: Tabular array Of Contents

  Contents Contents Chapter ane General Information ......ane 1.1 Warnings and Cautions ................... 1 1.2 Main Features ....................three ane.3 Technical Specifications ................. half dozen Chapter two Embroidery Guide ....... 7 2.one Construction and Usage Education of Control Panel .......... vii 2.ii Pedagogy of the Main Interface ..............
• Page 3 Contents four.ane.one. Settings of 10-Y Scale .................... 30 four.1.2. Settings of Rotate Bending ..................31 4.1.three. Pattern Management ....................32 iv.one.four. Prior Way ......................32 4.i.5. Rep. Way ......................32 iv.1.half dozen. Rep. Order ......................32 four.1.7. X-Y Rep. Times ..................... 33 iv.1.8.
• Page 4 Contents 6.6 Create Outline Blueprint .................. 48 half-dozen.7 Create High-speed Pattern ................48 six.viii Divide Pattern ....................48 6.9 Create Parameter Blueprint ................49 6.10 Mosaic Pattern .................... l half-dozen.11 Create Combined Pattern ................51 vi.12 Satin Sew Adjustment ................54 Chapter 7 Alphabetic character Pattern Operation ......
• Page 5 Contents nine.3 Language ...................... 68 9.4 Automobile Information ................... 68 9.v Machine Debugging ..................69 9.half dozen Date and Time ....................lxx nine.7 Touch Screen Correction ................lxx Chapter x Virtually JF Sequin Embroidery ....72 10.ane Brief of Sequin Embroidery ..............72 x.2 Embroidery Procedure of Sequin ..............
• Page 6 Contents Chapter 12 Taping Embroidery ......89 12.i Office Introductions ................89 12.ii Chief Technical Specification ..............89 12.iii Parameters and setting ................89 12.4 Relative Operations of Special Embroidery ..........91 12.4.1. Shift between Flat Sew Head and Special Caput ..........91 12.four.2.

• Folio vii: Chapter 1 General Data

  General Information Chapter ane General Information Thank you for using Dahao Computerized Control Arrangement for Embroidery Machine. Delight read this manual carefully so equally to operate the machine correctly and effectively. Also that, y'all should go on this manual properly for future use.
• Page 8 Affiliate 1 General Information Matters for Attention on Installation Don't jam the vent on the device. Don't insert other items into the machine, or information technology Attention may get burn down. Attending Make sure the installation management is correct. Don't expose the machine to humidity gas, corrosive gas, water, and other Attention combustible material.

• Page 9: Main Features

  Affiliate one General Information The ability supply switch has over-current protection function. If the over-current Attending switch is activated, the switch can just be closed after 3 minutes. Matters for Attention on Maintenance and Inspection If yous need to open the machine cover, please cut off the power supply at kickoff. Warning Due to the capacitance, operator must wait at least one minute before opening the machine encompass.
• Page 10 Chapter one General Information Blueprint volition be saved along with its parameters, color-changing orders and needle bar colors. Organisation tin can save the operational details for each blueprint. Users can set parameters for a design during the embroidery procedure of the previous pattern, which volition save fourth dimension and amend efficiency.
• Page 11 Affiliate 1 General Information enjoys the advantage of data transmitting through the World Wide Web (other formats may not be transmitted direct). Repetition Embroidery The user can increment embroidery productivity past using the part of repetition embroidery, which tin besides exist used with cyclic embroidery. Circadian Embroidery With this function, the automobile tin can automatically return to the origin and start the same embroidery once again when finishing the pattern 1 time.

• Folio 12: Technical Specifications

  Chapter 1 General Information Thread-trimming Thread-trimming can be manually operated. The machine tin trim the thread automatically at the end of embroidery process or at color-changing. Thread-breakage Detection In case of thread breakage or running-out of bobbin thread, the automobile will end and give warning past indicator.

• Page 13: Chapter 2 Embroidery Guide

  Affiliate 2 Embroidery Guide Chapter 2 Embroidery Guide 2.one Construction and Usage Education of Control Console Construction of Control Panel i. Touching Panel It adopts loftier-luminance LCD displayer and touching screen human-automobile interaction interface. ii. Buttons Press the keys to start the embroidery, pause the embroidery. 3.

• Page fourteen: Instruction Of The Main Interface

  Chapter 2 Embroidery Guide cut off during the information input/output, the information could be lost. In that case, please check the integrity of information in the USB deejay and repair it before using. Attention: During the procedure of initialization, if the power is cut off or the USB disk is pulled out, the USB disk may be damaged permanently.
• Page xv Chapter 2 Embroidery Guide Icon Name Clarification Reference Page Design Interface for pattern management Management Parameter Interface for parameter setting Setting Colour-changing Interface for color-irresolute order Order Setting setting Main Interface Main interface Pattern Display The design for embroidery will exist Area displayed in this area.
• Page xvi Chapter 2 Embroidery Guide Icon Name Description Reference Page the car is set at auto beginning, the car will brainstorm the embroidery automatically; if information technology is ready at transmission beginning, the user needs to printing the get-go primal for embroidery. In this status, select the needle position with...
• Page 17 Chapter 2 Embroidery Guide Icon Proper name Clarification Reference Page Currently, the machine is under Embroidery Confirmation Status, and user can start embroidery at whatsoever time. When the machine stops, Embroidery user tin can click this cardinal and confirm Confirmation cancelling Embroidery Confirmation Status.
• Page xviii Chapter 2 Embroidery Guide Icon Name Description Reference Folio Display patterns by figures for Pattern Listing users to select Previous/Next Display patterns in different pages Page Used to cheque blueprint details, scale Memory Pattern upwardly/down pattern, move or make Preview analog display of blueprint Letter blueprint and its parameter Alphabetic character Pattern...
• Page 19 Affiliate two Embroidery Guide Icon Proper name Description Reference Page Next Enter the next performance interface Icon Name Description Reference Page Common User tin can adapt these parameters to Parameter control the final embroidery event Setting of the design. Load the selected pattern, display Pattern Preview the pattern data and depict up the pattern shape.
• Page 20 Chapter 2 Embroidery Guide Icon Name Description Reference Page Electric current Performance Set, insert or delete needle bar number Position here. Colour Lump Brandish the color lump number of the Number List blueprint Display the needle bar number and Needle needle thread color Number and Colour...

• Page 21: Bones Procedure Of Embroidery

  Chapter 2 Embroidery Guide Icon Name Clarification Reference Page Needle Bar Colour Set the neeble bar color from default Setting colors ii.iii Bones Procedure of Embroidery The machine carries out embroidery based on the patterns saved in retentivity. The post-obit figure is the bones procedure of the embroidery: ①...
• Page 22 Affiliate two Embroidery Guide Set repetition, rotation and scaling —— press to enter parameter management interface. Prepare colour-irresolute orde —— press to enter colour-irresolute setting interface. Set patch embroidery —— press to enter color-changing setting interface and set patch embroidery of the pattern co-ordinate to hints. For border inquiry, border idling, pattern outline ——...
• Folio 23 Affiliate 2 Embroidery Guide 5. Manual Operation Transmission Thread-trimming: When the machine stops, press in the main interface to display a hint window, where user tin can press "Trim Upper&Bobbin Thread" to trim threads, or click "Trim Bobbin Thread" to trim the bobbin thread only. Press quit the thread-trimming operation.
• Page 24 Chapter 2 Embroidery Guide touch screen. Adjust Main Shaft Manually Usually, the main shaft needs to stop at 100° at needle/color-changing, frame-moving and beginning embroidery. User can manually plough the main shaft to 100° when it hasn't reached at that place. Press in the main interface to deport out this function.

• Folio 25: Normal Embroidery, Returning And Patching

  Chapter 2 Embroidery Guide ii.4 Normal Embroidery, Returning and Patching In embroidery confirmation status ( is displayed), printing to outset normal embroidery, and during embroidery, printing to end embroidery. When the automobile stops, printing to return the frame back along with the original embroidery path;...

• Page 26: Working Condition

  Affiliate 2 Embroidery Guide changes, you need to adjust spring force per unit area between the take-up leap and contact point. When the leap pressure is as well large, at that place will be False Alarm; when the spring pressure is also small, at that place volition exist Missing Alarm. For thread winding wheel type, it judges thread-breakage by detecting the winding bike bending.
• Page 27 Chapter 2 Embroidery Guide stop embroidery and render to embroidery confirmation status, where user can press start key again to enter embroidery running status. In embroidery confirmation status ( is displayed in the main interface), press and then press to confirm, user can release the confirmation status and return to embroidery prepare condition ( is displayed in the principal interface).

• Page 28: Affiliate 3 U Disk Management

  Affiliate iii Management U Disk Chapter 3 U Disk Management In U disk management interface, user can input patternss from U disk to machine, and vise versa; meanwhile, user can undertake some common U disk managements, like erasing file or directory, initializing the disk, etc. User tin can save patterns information nether different directories of the U disk based on different types.
• Page 29 Affiliate iii Management U Disk Enter U disk operation interface. Icon Proper noun Description Display the pattern files and file folders within the U File Listing disk in icons. It's used to select files. Page The current page number and full page number Information Back to Upper Return to upper level...

• Page 30: Pattern Preview

  Chapter 3 Management U Disk 3.2 Pattern Preview In the U disk management interface, press the pattern for preview. Pattern files and directories are shown in effigy in the list. I page of the list contains 8 items. If the corporeality of the object inside the electric current directory is more than than 8, the object list volition be displayed in many pages.

• Page 31: Pattern Input

  Chapter 3 Management U Disk The system loads the information from the U disk and user tin check details of the pattern, scaleup/down the pattern, motility or brand analog display of the pattern. For more information, delight refer to section 6.3. 3.3 Pattern Input To input patterns within the U deejay to the machine's memory, user need select the blueprint files to be inputted, and then input the number and proper noun for the patterns to be saved in...

• Page 32: Directory Performance

  Chapter 3 Management U Disk The system provides the minimum available pattern number equally the default value. User can use the keypad below to change the number. Press to confirm; The system will save the pattern data from the U disk to the memory. 3.4 Directory Functioning Enter directory: Double click the icon of the object directory to enter it, and the organisation will load the particular...

• Page 33: Delete Objects From U Disk (Including Pattern File And Directory)

  Chapter three Management U Disk 3.6 Delete Objects from U Disk (including design file and directory) Select objects to be deleted; Press to delete; System will ask user to confirm the deletion. Notation: If the user wants to delete a directory, the system volition delete all the files and sub-directories inside this directory.

• Page 34: Create A New Directory In The Current Directory

  Affiliate 3 Management U Disk 3.7 Create a New Directory in the Electric current Directory Press Input the new directory name Printing System will create the corresponding directory in the U disk and refresh the electric current object list. Owner'south Manual of BECS- A15 Computerized Command System...

• Page 35: Chapter 4 Mutual Parameters And Color-Changing Society

  Chapter iv and Color-Changing Order Mutual Parameters Affiliate 4 Mutual Parameters and Color-Changing Social club In this arrangement each pattern has its own settings of the normal parameters (like scale and repetition) and color-changing social club. When a new pattern is selected, the corresponding settings of normal parameters and color-irresolute order will become constructive.

• Page 36: Settings Of X-Y Scale

  Chapter 4 and Color-Changing Order Mutual Parameters The style for setting the parameter is similar to each other. This chapter will explicate how to prepare the "10/Y Calibration" as an instance and give the definitions of other parameters (refer to 4.1.one for setting method).

• Page 37: Settings Of Rotate Angle

  Chapter 4 and Colour-Changing Order Mutual Parameters Organization will display independently the modification windows for X Scale and Y Scale for users to fix respectively. Adjusting X-Y Scales User can press number pad to modify the scaling charge per unit at X direction, printing cancel the last input digit and press to clear the input number.

• Folio 38: Design Management

  Chapter 4 and Color-Irresolute Order Common Parameters Rota te 30 d eg re es Desig n sta rt b information technology Pattern Management four.one.3. Prior Mode iv.1.4. There are ii modes: "rotation prior to scaling" and "scaling prior to rotation". When user has gear up the parameters "Calibration X/Y"...

• Folio 39: 10-Y Rep. Times

  Chapter 4 and Color-Changing Order Common Parameters X-Y Rep. Times 4.one.7. X repetition times represent the number of columns, while Y repetition times the number of lines; as shown in the above picture, X repetition times are 3 and Y repetition times is two. The largest set value is 99*99.
• Page 40 Chapter 4 and Color-Irresolute Order Common Parameters Icon Name Clarification Colour Lump Number Display the number of the color lumps List of the pattern Display the needle bar number and Needle Bar Number thread color of each corresponding and Colour color lump Move upwards the color-irresolute list to Movement Upward...

• Page 41: Settings Of Color-Changing Order

  Chapter 4 and Colour-Changing Gild Mutual Parameters Settings of Color-Changing Order 4.2.ii. Press to enter color-changing setting interface. Input the needle bar numbers in order in the needle bar number selection area. The pattern display and the colour list will be refreshed subsequently each input. Printing to check whether the inputted color-changing order is correct.
• Folio 42 Chapter 4 and Color-Changing Order Common Parameters 45 default colors for option in the setting interface To set the needle bar colour, select the needle bar starting time and then select the color from the 45 default colour lumps. The respective color of the needle bar push will be refreshed.

• Page 43: Chapter 5 Settings Of Embroidery Parameters

  Affiliate 5 Embroidery Parameters Settings of Chapter 5 Settings of Embroidery Parameters Parameters are grouped according to different functions (meet Appendix 1 Parameter List) Press in the primary interface and printing (for user) or (for specialist) to enter parameter setting interface. After organization enters parameter setting interface, user can select the parameter for setting.

• Folio 44: Process For Setting Full general Parameters

  Chapter 5 Embroidery Parameters Settings of Notation: the number, proper name and current value of each parameter are displayed in the parameter list window. 5.1 Procedure for Setting Full general Parameters The setting procedure is similar for each general parameter. You can follow the guide of this department to ready all parameters.

• Page 45: Instruction On Some Functions Within General Parameters

  Chapter 5 Embroidery Parameters Settings of Press to terminate the setting. 5.ii Instruction on Some Functions within General Parameters There are brief descriptions of parameters in the appendix 1. Here, nosotros will introduce some functions mainly used in embroidery. Cyclic Embroidery Office 5.2.1.

• Page 46: Chapter 6 Memory Pattern Direction

  Chapter 6 Management Retention Pattern Chapter half-dozen Memory Design Management Memory pattern management includes selection of embroidery patterns, settings of patterns, change of patterns and operations for creating patterns. vi.ane Retentivity Pattern Management Interface and Other Retentivity Blueprint Operation Interfaces Press to enter memory design direction interface.
• Page 47 Affiliate half dozen Management Memory Blueprint Icon Name Description Used to shift to appointed page Previous/Next Page number Display the detailed information of Information Area the selected pattern and the memory information. Bank check the details of the pattern; scale Pattern Preview up/downwards, move or simulate the pattern.

• Page 48: Select Pattern For Embroidery

  Chapter 6 Management Memory Pattern In this interface, printing each operation to enter the corresponding interface. Please read the post-obit paragraphs for detailed caption. Press to plow page, and press to render to memory pattern management interface. 6.2 Select Pattern for Embroidery Press to enter memory pattern management interface.
• Page 49 Chapter 6 Management Retentiveness Pattern Icon Proper name Description Pattern Preview Display the blueprint in the appointed method Area and speed Depict/Break Shift between cartoon pattern Switch and pausing display Move upwards Move the pattern upward Single Step Describe the design by cartoon unmarried steps Display Scale upward Enlarge the pattern in the preview area...

• Page 50: Blueprint Output

  Chapter 6 Management Memory Pattern Icon Name Description Movement downwards Move the blueprint downwards Move correct Move the pattern rightward Deceleration Lower the display speed of patterns Acceleration Fasten the display speed of patterns Redraw Redisplay the selected design Quit Quit the functioning in pattern preview interface Press to enter memory pattern management interface.
• Folio 51 Chapter 6 Direction Memory Pattern System volition brandish the window to "Select U disk" and press to make the choice. Input the pattern name saved in the U disk. The system provides the minimum available design number every bit the default value. User can use the keypad below to alter the number.

• Page 52: Copy The Memory Design

  Chapter vi Management Retentiveness Pattern Press of the completion hint. Printing to return to pattern management interface. 6.v Copy the Memory Pattern Press to enter memory pattern direction interface. Select a pattern in the memory pattern epitome display area. Press to enter memory operation pick interface.
• Folio 53 Chapter 6 Management Retentivity Pattern To change the new blueprint name, click "New Pattern proper name" and input the new name in the pop-up window. Press to re-create the blueprint and return to design operation option interface. Press to cancel the copy operation and return to blueprint performance pick interface.

• Page 54: Create Outline Pattern

  Chapter six Management Memory Design 6.six Create Outline Pattern This functioning can generate a new pattern based on the outline of the designated pattern. Press to enter memory pattern management interface. Select a pattern in the memory pattern prototype brandish area. Press to enter retentiveness operation selection interface.

• Folio 55: Create Parameter Design

  Chapter half-dozen Management Retentiveness Pattern Press to enter memory pattern management interface. Select a pattern in the memory blueprint image brandish area. Printing to enter retentiveness operation selection interface. Printing "Divide Pattern" to enter the operation interface. User tin can press to input new pattern number and name instead of default ones. Press "Divide Run up"...

• Page 56: Mosaic Pattern

  Chapter 6 Direction Memory Design Select a pattern in the memory design image display expanse. Press to enter memory performance option interface. Press "Create Parameter Pattern" to enter the operation interface. User tin can press to input new design number and name instead of default ones. Press to create the parameter pattern and return to design functioning selection interface.

• Page 57: Create Combined Pattern

  Chapter 6 Management Memory Design five. User tin can press to input new pattern number and name instead of default ones. half dozen. Printing "X Interval" to input the value. Press "Y Interval" to input the value. 7. Press to combine patterns and return to pattern operation selection interface.
• Page 58 Chapter half dozen Management Memory Blueprint Press "Create Combined Blueprint" to enter the operation interface. The combined ID shows the electric current pattern number and how many patterns the combined pattern is composed of. Display course is "design number (the full amount of patterns)". Gear up the parameters of the starting time pattern, including pattern number, scaling ratio, rotating angle, pattern direction and priority fashion.
• Folio 59 Chapter 6 Management Memory Pattern Printing to enter the operation interface. The organisation will hint user to input the new pattern number and the new pattern name. Press to save the combined design and return to pattern operation option interface. Press to quit saving and return to pattern operation selection interface.

• Folio 60: Satin Sew together Adjustment

  Chapter 6 Direction Retentiveness Design 6.12 Satin Sew together Adjustment This functioning is to adjust the satin width in the design according to the need. Press to enter retention pattern direction interface. Select a pattern in the memory design prototype display area. Press to enter memory performance pick interface.

• Page 61: Chapter 7 Letter Design Operation

  Affiliate 7 Alphabetic character Pattern Functioning Chapter 7 Alphabetic character Pattern Performance Arrangement tin can generate letter pattern based on the congenital-in font libraries. 7.1 Enter Main Interface for Letter Embroidery Press in the pattern management interface to enter the chief interface for letter embroidery.

• Folio 62: Adapt Alphabetic character Blueprint

  Affiliate 7 Operation Letter of the alphabet Design The upside of the window is the brandish area and the downside is the operation area. After inputting the alphabetic character cord, press to salvage. seven.3 Adjust Letter Pattern 1. Letter Pattern Adjustment Interface There are iv rows of operation keys in the interface, the kickoff ii rows are the file and view Owner's Transmission of BECS- A15 Computerized Control Organization...
• Page 63 Chapter seven Alphabetic character Pattern Operation functions keys, the tertiary row are keys for adjusting letter of the alphabet organization, and the forth row are keys for adjusting letter string. In the middle of the interface is the letter pattern brandish area. More often than not, user should set the parameters, such as whole organization method, rotate bending and letter interval of the letter string;...
• Page 64 Chapter vii Performance Letter of the alphabet Blueprint "Vertical Overturn": overturn the selected letter of the alphabet vertically. "Clockwise Rotation": use the letter as centre ("＋" in the middle of letter), and rotate the selected alphabetic character clockwise. 3. View and File Operation "Letter Density": accommodate the density of the letter of the alphabet string. Press this primal to brandish thedensity dialog box, where user can prepare stitch form, increment or decrease density.
• Page 65 Affiliate seven Letter Pattern Operation "Actual": show the letter of the alphabet design in the actual size. At this time, the size of pattern in interface is equal to actual size. "Center": calibration up/downward the view, and so as to show the whole pattern for checking. "Salvage": it is used for saving the edited letter of the alphabet blueprint.

• Page 66: Salve Letter Blueprint

  Chapter 7 Operation Letter Design alter along with the position of arc, just fix at a sure angle "Increase Radian": when user ranks the messages in arc, this key can enlarge the radian of the reference arc "Reduce Radian": when user ranks the letters in arc, this cardinal tin can reduce the radian of the reference arc "Whole Clockwise Rotate": rotate the whole letter string clockwise "Enlarge...
• Folio 67 Chapter seven Letter Blueprint Operation After saving, system will render to the main interface for letter embroidery. If there is no demand to edit letter design, printing to quit and the following hint will be displayed. Press to salve or press to cancel saving, and render to the blueprint management interface.

• Page 68: Chapter viii Assistant Performance

  Affiliate 8 Assistant Operation Affiliate 8 Banana Operation User tin can perform some common assistant operations by pressing keys. 8.1 Frame Selection User tin can press " " key to enter the interface for frame selection and position. Icon Proper name Design Range Display Frame Blazon Selection Position Pattern to the Center of the Frame...

• Page 69: Clear Xy Deportation

  Chapter 8 Assistant Performance Icon Proper name Recovery of Pattern Origin Manual Pattern Movement Leave eight.2 Clear XY Displacement This office is to clear the X and Y displacements. In the main interface , press System will fix electric current Ten/Y value to 0. User can cheque the electric current X/Y value on the main interface.

• Folio seventy: Low Speed Idling Astern

  Affiliate 8 Banana Functioning (1) Printing once to idle frontwards past one stitch (ii) Hold pressing for 2s to idle forward continuously Low Speed Idling Backward eight.3.2. one. In the primary interface , printing 2. Press (1) Printing once to idle backward by one stitch (2) Hold pressing for 2s to idle backward continuously High Speed Idling Forward...

• Page 71: Chapter nine Other Functions

  Chapter 9 Other Functions Affiliate 9 Other Functions These functions tin be used during the usage, including auto maintenance, data inquiry and organisation settings. Press to enter the interface for other office, where a listing of function keys will be displayed for user to operate by pressing. The words on the keys can help user understand the functions.
• Page 72 Affiliate 9 Other Functions In the higher up interface, the statistic information is displayed in a chart. If user demand check details of each blueprint, press to enter the corresponding interface. Press to render to the interface of statistics. Press to delete statistic information and press to return.

• Page 73: Set Frame Origin

  Affiliate nine Other Functions ix.ii Set Frame Origin Setting the frame origin is the premise for saving the pattern'southward showtime point and setting frame protection at sudden power-off. So subsequently the installation or maintenance of machine, it'southward necessary to set the frame origin. Press to enter the interface for other functions.

• Page 74: Language

  Chapter 9 Other Functions 9.3 Language System supports Chinese, English language, Turkish, Castilian, and so on. Press to enter the interface for other functions. Press to enter language interface. Select the language you want and system will enter the primary interface in the selected language.

• Folio 75: Machine Debugging

  Affiliate nine Other Functions This office volition help user cheque machine software information. Press to quit. nine.5 Machine Debugging This operation is only for repairman, ordinary users are banned to undertake these operations. Because these operations involve some mechanical work, please pay attention to the personal condom and equipment security during the performance.

• Folio 76: Date And Time

  Chapter ix Other Functions Debugging Interface 1 Debugging Interface two Facial Suture Clamp 10-centrality parameter examination Y-axis parameter exam Driver Parameter Test Main shaft parameter exam Save driver parameters Load driver parameters Test pull bar switch, frame limit, knife origin, knife maximum point,...
• Folio 77 Chapter 9 Other Functions functioning. In order to avoid the trouble acquired by the inaccurate correction, this performance is only for the person with dominance. Press to enter the interface for other functions. Press to enter debugging interface, where user can select "Other" to enter the corresponding interface.

• Page 78: Chapter 10 Most Jf Sequin Embroidery

  Affiliate ten Near JF Sequin Embroidery Chapter ten About JF Sequin Embroidery ten.1 Brief of Sequin Embroidery Sequin embroidery is formed by many sequins and the specific run up form. Because the sequins are made of the hard and shining material with smoothen surface, the sequin embroidery, formed by the sequins with unlike colors, shapes and sizes, features the unique shining effect.

• Page 79: Embroidery Process Of Sequin

  Chapter 10 Nearly JF Sequin Embroidery v. Sequin-feeding method and the feeding angle can be inverse via the operation console. Ⅲ. Specifications 1. Size of Sequin available: Diameters at 3mm, 4mm, 5mm, 6.75mm and 9mm； two. Max speed at 1000rpm. 10.2 Embroidery Procedure of Sequin At sequin embroidery, user needs to follow the procedure at below: 1．Input pattern with sequin code, refer to ten.3...

• Folio lxxx: Edit Sequin Design

  Affiliate 10 About JF Sequin Embroidery Enter to accept access to the design input interface as shown in below: Setting procedures: User should input number and name of pattern. x.4 Edit Sequin Design This part is to edit sequin design within the system. After edition, all the designs volition be saved as special multi-sequin design.
• Page 81 Affiliate 10 About JF Sequin Embroidery Display design in the center; Brandish pattern iv.five times every bit original one; Zoom in sequin design; Zoom out sequin blueprint; Display in original size iii. Click to show all stitch forms of the design, as shown below: 4.
• Folio 82 Chapter ten Nearly JF Sequin Embroidery keys, the next stitch code in that direction will be selected, regardless at its stitch number. "navigating by stitch number": when you lot press direction keys "leftward" or "upwards", the last sequin stitch code (smaller than the electric current number) will be selected;...
• Page 83 Chapter 10 About JF Sequin Embroidery 7. Edition of Alternating Sequin If you desire to use the alternating sequin, you should define a range for using them at first. In " ", employ "Set Range Showtime Sew together" and "Prepare Range End Sew together" or "Select Current Color Range"...
• Page 84 Affiliate ten About JF Sequin Embroidery a) Click to select sequin mode and click to ostend. Sequin names are A, B, C and D. If all these iv sequins are included, A will be on the superlative, then B, C and D. b) Later that, press to ostend the sequin-feeding fashion.

• Page 85: Setting Of Multi-Sequin Embroidery Parameters

  Chapter 10 About JF Sequin Embroidery Input design number and name, then click to salvage the edited sequin design, or click to cancel the saving. 10.5 Setting of Multi-Sequin Embroidery Parameters In this department, we volition introduce how to suit sequin device and the parameters used in multi-sequin embroidery.
• Page 86 Chapter ten Nigh JF Sequin Embroidery thread-breakage. When the setting is "No", the user needs to lift the presser foot manually at thread-breakage. 6. Sequin Ind. Up/Downwardly When the setting is "Yes", the sequin devices will move independently. When the setting is "No", they will motility collectively vii.

• Page 87: Manual Operation Of Sequin Embroidery

  Affiliate ten About JF Sequin Embroidery This is to set gap number. If in that location is no gap, and so it should be set to 0. sixteen. L/R Sequin Valve Action Time This parameter is for setting the response time at adjusting the valve activeness. The larger value ways the longer response fourth dimension.

• Folio 88: Sequin Mending

  Affiliate 10 Well-nigh JF Sequin Embroidery (2) Transmission Operation for Middle Motor Sending B Sequin Put the sequin switch to the downward position, punch the thread-breakage detection switch to turn on the reddish indicator and press manual sequin-feeding push. (3) Manual Operation for Rear Motor Sending C Sequin Put the sequin switch to the down position, dial the thread-breakage detection switch to turn off the head indicator (punch it to downwards position too) and printing manual sequin-feeding button.

• Page 89: Chapter xi Performance Of Zigzag Embroidery

  Affiliate xi Operation of Zigzag Embroidery Chapter 11 Operation of Zigzag Embroidery 11.1 Functions 1. Zigzag Embroidery (ZIG Embroidery): this role is to make the thread form the design with certain stitch forms, which take been saved in the reckoner in advance, the Z4 and Z5.
• Page xc Chapter xi Operation of Zigzag Embroidery the parameters relating to the zigzag embroidery. 1. Right Zigzag Device: Y (Due north) —— Y means the first needle is the zigzag embroidery position. 2. Left Zigzag Device: Y (North) —— Y ways the last needle is the zigzag embroidery position.

• Page 91: Relative Operations Of Zigzag Embroidery

  Chapter 11 Operation of Zigzag Embroidery 15. Thread-loosing Motor for Zigzag Embroidery: Yes/No. if the device is double motor taping device, user needs to set information technology at "Y", or user should set it as "N". 16. Zigzag Device Movement Detection: Test whether the device moves to the proper position.
• Page 92 Chapter eleven Functioning of Zigzag Embroidery key to change the embroidery fashion. If user has nothing to alter, please press exit. Definition of icons: Normal Embroidery； Z4 Embroidery: The rod swings at each stitch. Z5 Embroidery: The characteristic of it is aforementioned to Z4. It is suitable for the thick thread. (Refer to the parameter: Swinging scope of frame in Zigzag sewing) (2)Automatic Shift Earlier embroidering, automatic shift tin can be achieved through setting the color-changing...

• Page 93: M Axis Functioning Of Zigzag Embroidery

  Chapter xi Performance of Zigzag Embroidery Printing the corresponding icon to select the very zigzag embroidery mode, if you don't desire to change, and then press to exit. After confirmation of the embroidery manner and the setting of color-changing order, the system will display every bit below: M Axis Functioning of Zigzag Embroidery xi.5.2.
• Folio 94 Chapter 11 Operation of Zigzag Embroidery （2）Return the M-axis to the Origin Point (Step Moving) Printing the key "M axis to wheel" and click on the dialogue window to let the Grand axis rotate to the "Zero indicate", click to get out the performance. （3）M centrality rotate left manual Printing the key "Grand axis rotate left transmission"...

• Folio 95: Affiliate 12 Taping Embroidery

  Taping Embroidery Chapter 12 Chapter 12 Taping Embroidery Function Introductions 12.i 1. Taping function: Record tin can be used as embroidery material. It includes taping one and taping 2 (bullheaded embroidery) 2. The presser of special embroidery tin go up and down automatically or manually. (This function is only for the machines installed with relevant apparatus) 3.
• Page 96 Taping Embroidery Chapter 12 4. D31 Rod Pos. of ZIG: Left/ Right The "ROD POS. OF ZIG" determines the position of swing rod when One thousand axis is in origin. This parameter must be set in accordance with bodily mechanical position. five.

• Page 97: Relative Operations Of Special Embroidery

  Taping Embroidery Chapter 12 The parameter tin can alter the coiling density; e.1000. the set value ii means one coiling every two stitches. 12.four Relative Operations of Special Embroidery between Flat Stitch Caput and Special Head Shift 12.4.1. (1)Transmission Shift In the chief interface, printing the central to enter into colour-changing interface.

• Page 98: M Axis Performance Of Special Embroidery

  Taping Embroidery Affiliate 12 In the main interface, press " " to enter into color changing interface, and and then printing the cardinal (zigzag head) to change zigzag embroidery mode: Press the corresponding icon to select the very zigzag embroidery mode, if you don't desire to modify, and then press to exit.

• Page 99: Operations Of Clamp Foot

  Taping Embroidery Chapter 12 Press the cardinal "M axis to be ready" and click on the dialogue window to allow the M axis back to the working bespeak, click to exit. （2）Render the M-centrality to the Origin Point (Footstep Moving) Printing the key "M axis to cycle"...

• Folio 100: Steps On Special Embroidery

  Taping Embroidery Chapter 12 Movement cursor to "Sway Zig Rod to 100". According to the hint in dialogue window, user tin can pull bar to let all the swing rods human action once. Click " "to leave. Users tin adjust swing range by using this function. two.
• Page 101 Taping Embroidery Affiliate 12 2. E centrality According to the difference in motor and the equipment of proximity switch for positioning the origin, E axis devices can exist divided to the following types: Driven past stepping motor separately, without proximity switch for positioning origin 2) Driven by stepping motor collectively, with proximity switch for positioning origin three) Driven by stepping motor collectively, without proximity switch for positioning four) Driven by servomotor, with proximity switch for positioning origin...

• Folio 102: Chapter 13 Online Update Of Main Software

  Online Update of Master Software Chapter thirteen Chapter 13 Online Update of Primary Software Update Procedure： 1. Hold pressing and power on. ii. The screen will display the post-obit interface, where user should select "update program" three. Select the update method (via U disk) Owner's Manual of BECS- A15 Computerized Control System...
• Page 103 Affiliate 13 Online Update of Primary Software 4. Organisation will display the window to "Select U Disk", and select the target U deejay. 5. After entering the interface of the U disk, select the program to be updated. Owner's Manual of BECS- A15 Computerized Command Organisation...
• Page 104 Online Update of Chief Software Affiliate 13 6. Press to update. 7. When finishing update, system volition automatically display a hint "update completed, if no others, delight restart", and then please restart. Owner's Manual of BECS- A15 Computerized Control System...

• Page 105: Chapter 14 Update Of Software In Peripheral Lath

  Chapter xiv Update of Software in Peripheral Board Affiliate fourteen Update of Software in Peripheral Board Update Procedure: Press to enter the interface for other functions. Printing to enter the interface of statistics. Possessor'southward Transmission of BECS- A15 Computerized Control System...
• Page 106 Update of Software in Peripheral Lath Affiliate 14 Select "peripheral board direction" to enter the direction interface, where user should select "peripheral board update". Press Owner's Manual of BECS- A15 Computerized Command System...
• Folio 107 Chapter 14 Update of Software in Peripheral Board Select the U deejay Select the programme to be updated and printing Owner'southward Manual of BECS- A15 Computerized Control System...
• Page 108 Update of Software in Peripheral Board Affiliate fourteen when system hint successful update, the update is completed. Owner'south Manual of BECS- A15 Computerized Control System...

• Page 109: Appendix i Parameter List

  Slow STI. After 0~3000 Patch Speed Later Patch 80~chiliad Support 3D? No, Yeah It is fit for high-speed machine using dahao servo-motor Filter Short Sew together No, Yep commuter. It only become effective after user confirm the embroidery again. Filtering Short Sti 0.5mm 0.1mm~0.6mm...
• Page 110 Appendix 1 Parameter List Name of Parameter Default Value Range of Value Remarks Thread-breakage Detection Parameters T. B. Detect No, Yes Sti. Non T.B. Detect 8 stitch 0 stitch ~fifteen sew together Stop later T.B. No, Yes discover T.B. Dorsum Sti. 0 sew together 0 stitch ~7 stitch Back&Patch Count...
• Page 111 Range of Value Remarks Speed Speed When Over 0,1,2,…,30 frame It is fit for high-speed motorcar X direction Frame 230~280 using Dahao servo-motor Angle A driver. X direction Frame 230~280 The same equally above. Angle B Y direction Frame 230~280 The same as in a higher place.
• Page 112 Appendix one Parameter List Name of Parameter Default Value Range of Value Remarks to avoid main shaft vibration during braking. Usually it'south fix as 1. Stop Ok bef. Pull No, Yep The parameter is used when the main shaft uses induction Ratio motor.
• Page 113 Appendix one Parameter List Name of Parameter Default Value Range of Value Remarks Para. Trim is OK No, Aye Set the hook angle by motor. Hook Angle by When user increases the value, -100 -100~+100 Motor the claw angle is moved backward.
• Page 114 Appendix 1 Parameter List Proper noun of Parameter Default Value Range of Value Remarks … Speed for Sequin R 300,310, ,the maximum speed 300,310, … , Speed for Sequin L maximum speed Sequin R Adj. -15~15 Angle Sequin L Adj. -15~15 Angle Auto Start...
• Page 115 Appendix 1 Parameter List Proper name of Parameter Default Value Range of Value Remarks 5.iv ～ 36 One-style Set 5MM of R Double-means bending; Double-ways Sequin 5.4～36 angle 5.iv ～ 36 One-fashion Set half-dozen.75MM of R Double-ways bending; Double-means Sequin /21.half-dozen 5.4～36 bending five.4 ～...
• Page 116 Appendix i Parameter List Name of Parameter Default Value Range of Value Remarks /green/blue/purple/yell ow/cyanogen 3/4/5/6.75/9mm B Size&Color of L Low-cal gray/golden/crimson 4mm blue Sequin /light-green/blue/purple/yell ow/cyanogen 3/4/5/6.75/9mm C Size&Color of Fifty Light grey/gold/ruby-red 5mm royal Sequin /green/blue/regal/yell ow/cyanogen iii/iv/5/half dozen.75/9mm D Size&Colour of L Light grey/gold/red...
• Folio 117 Appendix 1 Parameter List Name of Parameter Default Value Range of Value Remarks pos. A-Zig corking efficiency mode ST01 Work manner ST02 Actuation time adj. i~20 ST03 Looped time 30~100 Whether cut line ST04 Yep, No when leap A-Zig Yes, No Loosing-Motor A-TAPING No, Yes...
• Page 118 Appendix 1 Parameter List Proper noun of Parameter Default Value Range of Value Remarks conveyor motor Adj speed of R 0~15 add-power motor Time para for R one~fifty bead Fourth dimension para for R ane~l sequin Count of R bead None, Yes None motor All head alter...
• Page 119 Appendix ane Parameter List Name of Parameter Default Value Range of Value Remarks Spec. Emb. Trim Low, Above & Low, No Trim Mode No Trim Speed for Sequin Fifty 300~850 Spec Minimum 250~400 Speed Spec. Speed-Down i~180 Angle Spec. Speed-Down Ratio Z Shift Command 0~180...
• Page 120 Appendix 1 Parameter List Name of Parameter Default Value Range of Value Remarks M100 Starting time needle light no,yes Speed 80~800 limit 1~10 Number of heads Machine head i~1500 altitude Internet Parameters Machine Number one~245 Server Port 1600 1~9999 It is used for setting sever port when it is connected to PC.

• Page 121: Appendix 2 Directions Of U Deejay Functioning

  Appendix 2 Directions of U Disk Operation Appendix two Directions of U Disk Operation Operations Methods or Standards Remarks USB I/O Same as floppy disk Performance priority between USB USB Disk deejay and floppy disk Format supported by USB disk FAT16 and FAT32 Support long file name Support, but not displayed...

• Page 122: Appendix 3 Automated Position Limitation Function Instructions For

  Appendix three Automated Position Limitation Part Instructions for Apparel Embroidery Appendix three Automatic Position Limitation Function Instructions for Apparel Embroidery A、 Working Principle The automatic position limitation function of single-head embroidery machine controller is to determine the embroidery range of the frame by setting the distance from the centre of the frame to the origin (that is X-/Y position limitation optical coupler) and the bodily frame size (unit: mm).
• Page 123 Appendix three Automated Position Limitation Function Instructions for Wearing apparel Embroidery two、 Clear XY Displacement In the main interface, printing " " key to articulate the XY deportation displayed hither. 3、 Manual Frame-moving In the main interface, click the frame-moving key to move the frame to overlap its center with the needle hole.
• Page 124 Appendix 3 Automated Position Limitation Function Instructions for Dress Embroidery 4、 Fix Frame Center and Size In the main interface, check the coordinates of XY, which is the position of frame center. Press " " key, to enter the interface for frame choice and position setting; then press "...
• Page 125 Appendix 3 Automatic Position Limitation Function Instructions for Apparel Embroidery There are four parameters: "X direction center" ways the altitude at X direction between the frame center and X- direction position limitation optical coupler; "Y direction center" ways the distance at Y direction between the frame center and Y+ direction position limitation optical coupler.
• Page 126 Appendix 3 Automatic Position Limitation Function Instructions for Apparel Embroidery C、 Cancel Position Limitation Set "Frame Selection" as "No Frame", the position limitation function volition be canceled and the software protection for the frame of flat embroidery will as well become invalid. Owner's Manual of BECS- A15 Computerized Control Arrangement...
• Folio 127 Appendix 3 Automatic Position Limitation Function Instructions for Apparel Embroidery D、 Mutual Frame Size (Unit: mm) Frame 1: Frame 2: Size: 550×375 Size: 290×290 Embroidery Range: 430×260 Embroidery Range: 230×230 Frame 3: Frame four: Size: 200 Size: 150 Embroidery Range: 150 Embroidery Range: 100 Frame 5: Frame 6:...

• Folio 128: Appendix 4 A15 Controller Operation Quick Guide

  Appendix 4 A15 Controller Operation Quick Guide Appendix 4 A15 Controller Operation Quick Guide Part I. Embroidery Design Management " ": memory pattern preview, letter pattern performance, delete pattern, blueprint input/output, pattern function setting, etc. A. Input Pattern B. Select Blueprint for Embroidery →Employ page keys to select patterns →...
• Page 129 Appendix 4 A15 Controller Functioning Quick Guide Part II. Transmission Operation A. Manual Trimming B. Manual Color-changing C. Master Shaft Jog D. Manual Frame-moving Direction Keys: → → → Speed Shift Cardinal: East. Empty Feed 1、 Empty Feed and Render at Low Speed →...

goughowlening.blogspot.com

Source: https://www.manualslib.com/manual/1624034/Dahao-Becs-A15.html

Share :